Louvre Facades

Features

• Excellent airflow characteristics
• Aesthetically pleasing
• Louvre blades lined through doors and panels.
• No visible horizontal joints.
• Unlimited height of assembly subject to structural restrictions.
• Single, double, leaf & half, 3-leaf and 4-leaf options available with side or overpanels.
• Anti-vermin mesh or blanking to rear.
• Strong fully welded construction.
• Rear concealed joining framework for frameless continued louvres.
• Top Louvre panels can be fixed through front face if rear space is restricted or internal access is not available.
• Non-fire rated.
• Architectural marine grade polyester powder coat finishes as standard.

Sizes

Unlimited height and width of assembly subject to structural restrictions.

Louvre Section

Louvre blades welded into a 50mm x 18mm x 3mm steel angle section framing.
Louvre blades formed to profile shown.

Frame

100 x 50 x 3mm rectangular hollow section to sides, sides plus head or all four sides

Lugs or through frame fixing options available for framework, (fixings supplied).
All fully demountable construction.
Alternative frame profiles available.
Hinge parts welded to frame and door leaf.

Air flow

Approximately 50%

Fixing Method

Door/ Louvre frames second fixed within structural openings using M10 expansion anchors to masonry/concrete openings or M10 machine screws to drilled and tapped holes in steelwork. Frame to wall joints sealed with mastic sealant.

 Hardware

• Internal multi-point panic bar with Sunray 6000 with hasp & staple to the outside.
• Mortice Locking
• Maglocks
• Various other locking features available.
• Door closures
• Door stays (holding doorset open to 90°)

Finishes

Top coat: Architectural marine grade polyester powder coat. 30% gloss level. 60-80 microns thickness. Optional marine grade zinc rich primer for enhanced corrosion resistance. 60-80 microns thickness. Stocked range of 58 standard colours. Other colours and finishes available on request.

Standard Frame option.

Seamless stackable option